Technical features of Digital Induction Welding System
The straight line platform brass distributor system automatic induction braze welding through combining the induction heating machine and brazing fixture together to realize the high automation level. Here we mainly take the brass distributors as an example to give a brief introduction.
● Fast brazing speed.
● High yield rate of the finished products, unified welding performance, beautiful appearance.
● It is easy for workers to operate, and it is not easy for them to drop the yield rate due to the workers’ operation skill level factors.
● Greatly reduce the processing cost of each workpiece, so as to achieve the maximum benefit.
● This automatic induction brazing equipment is for mass production.
General Technical parameters of Digital Induction Welding System
Item | Contents | Item | Contents |
Input voltage | 3*380V+1*Zero Line | Chip speed | 72MHz |
Frequency | 50HZ | Heating current setting | 5 sections(can reach 32 sections) |
Rated current | Heating time setting precision | 0.1s | |
Rated apparent power | (15-60)KVA | Process parameters are set to encrypt or not | Password lock |
Max. apparent power | (18-72)KVA | displayer | 3.5-inch true color display, resolution 320*240 |
Recommended air switch current level | (32-120)A | Working current display mode | Working current curve display |
Rated output power | (12-60)KW | Alarm interface | Over current, over voltage, lack water, lack phase, overheat alarm. |
Max. Output power | (18-70)KW | communication interface | DB-9 and 4-core aviation plug |
Output power adjustment range | 8~100% | Bus-bar access | RS485(suggest), Profibus(optional),CANbus(optional) |
Output frequency | 10~55Khz adjustable | Memory card type | Sd card(Store more than 360 days of processing data and alarm data) |
Control mode | All digital embedded control software | data analysis software | It is installed and operated under Windows and has the functions of processing data analysis, processing data comparison, searching specific processing workpiece parameters and alarm parameters, etc |
main control chip | ARM STM32 | Minimum cooling water flow | 10L/min |
Max. Cooling water temperature | 40℃ | Environment temperature | +5℃~+50℃ |
Cooling water pressure Min/Max | 4/6bar(depends on different coils) | Cooling water quality-PH value | 7.0-9.0 |
Memo: | |||
Digital Induction Welding System Pictures display
Straight Line Working Digital Induction Welding System pictures
The Digital Induction Welding System Finished Parts Display
This straight-line automatic induction braze welding system is mainly used for the air conditioner, automotive, valves, bathroom accessories, etc, fields induction braze welding field. Suitable for mass production.
