Enquire
High Frequency Induction Heater 1

Automatic Induction Heating Machine For Induction Quenching Annealing

Our high frequency induction heater adopt imported components, reduce the heater failure rate.
20% more efficient than the similar products, save your production cost 20-40%. Manufacturer provides straightly.

Share to:

Product details

Technological advantages of High Frequency Induction Heater

◆ High heating speed: the highest heating speed is less than 1 second.

◆ Wide application fields: can heat all kinds of different metal workpieces.

◆ Easy to install: connect the induction heaters power supply, induction heating coil, and the inlet&outlet water pipes are ok. Small volume and lightweight.

◆ Easer operation: workers can use it in several minutes.

◆ Fast starting time: The heating can be started after turn on the water and power.

◆ Energy-saving: It saves 70% more power than the old vacuum tube high-frequency induction heaters.

◆ Good heating efficiency: the heating result is uniform, fast-rising temperature, the oxide layer is small, no waste parts after annealing.

◆ Perfect self –protection functions have over-voltage, over-current, lack of water alarm indicators, and also have the automatic control and protection.

◆ Controlled temperature: through the set heating time to control the workpiece heating temperature.

◆ Full load design: 100% full load design, can work 24 hours continuously.

◆ Small volume: lightweight, green environment.

◆ No high voltage: safety voltage, can customize 380V-480V voltage.

Technical Parameters of High Frequency Induction Heater

Model

Max input power

Frequency

KQG-15

15KW

30-100KHZ

KQG-25

25KW

 

KQG-35

35KW

 

KQG-45

45KW

 

KQG-70

70KW

30-80KHZ

KQG-100

100KW

 

KQG-120

120KW

 

KQG-160

160KW

 

KQG-200

200KW

 

KQG-250

250KW

 

KQG-300

300KW

 

Application cases of High Frequency Induction Heater

Our high-frequency induction heaters are mainly used for the following metal heating fields.

◆ Mainly used for the shaft, gear hardening, inner hole hardening, hardening depth can reach less than 2mm.

◆ Carbon steel screws and stainless steel screws heated glue.

◆ Saw blades continuous quenching, stainless steel, and alloy steel filaments annealing or quenching.

◆ Carbide saw-tooth welding, reamer welding, communication cable joint welding, filter capacitor welding.

◆ Weld metal pipe joints, continuously welding.

High frequency induction heater application

Our Service

◆ Be clear about customer workpiece requests and make suitable heat treatment solutions.

◆ Face to face quotation and solve the customer’s heating process trouble.

◆ Free process testing, and choose a suitable model.

◆ Perfect after-sales service, professional technical training.

Send Inquiry

error:

Get A Quote